DIN EN 24017

Hexagon head screws – Product grades A and B (ISO 4017:1988) English version of DIN EN 24 017

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is shorter, and product grade B for threads over M24 or nominal lengths over 10d or 150 mm, whichever is shorter.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 28740
1992
English

Full-length parallel grooved pins, with chamfer (ISO 8740 : 1986) English version of DIN EN 28 740

This International Standard specifies the characteristics of full-length parallel grooved pins with chamfer which have three equally spaced grooves impressed longitudinally on their exterior surface and a pilot to facilitate insertion, with metric dimensions and nominal diameter, d1, from […]
DIN EN
DIN EN 28748
1992
English

Coiled, heavy duty spring-type straight pins (ISO 8748 : 1987) English version of DIN EN 28 748

This International Standard specifies the characteristics of heavy duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 20 mm inclusive.
DIN
DIN 966
1984
English

Cross recessed raised countersunk (oval) head screws

If raised countersunk oval head screws with length tabled below the stepped line are to be supplied threaded up to the head, i.e. deviating from the standard design, the letter A shall be incorporated in the description, in accordance with DIN 962, or the deviating thread length shall be […]
IFI
IFI-101
2007
English

TORQUE-TENSION REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL HEX AND HEX FLANGE NUTS

This standard covers torque-tension requirements for two types of plating: 0.0002/0.0004 in. thickness electrodeposited cadmium plated and lubricated Grades B and C prevailing-torque type steel hex nuts in sizes 1/4 to 1 in., inclusive, and Grades F and G prevailing-torque type steel hex […]
ISO
ISO 8734
1997
English

Parallel pins of hardened steel and martensitic stainless steel (Dowel pins)

This International Standard specifies the characteristics of parallel pins (dowel pins) of steel, through hardened or case hardened and martensitic stainless steel with nominal diameters, d, from 1 mm to 20 mm inclusive.
DIN
DIN 929
2000
English

Hexagon weld nuts

This standard specifies requirements for sizes M3 to M16 coarse and fine pitch thread hexagon weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in DIN EN ISO 898-1. Hexagon weld nuts with flange are specified in DIN 977.