DIN EN 24032

Hexagon nuts, style 1 – Product grades A and B (ISO 4032 :1986) English version of DIN EN 24032

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon nuts, style 1, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d M16.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 915
1980
English

Hexagon socket set screws with dog point – ISO 4028 modified

ISO 4028 specifies product grade A hexagon socket set screws with dog points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
DIN EN
DIN EN 10269
1999
English

Steel and nickel alloys for fasteners with specified elevated and/or low temperature properties – English version of DIN EN 10269

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperature made of non-alloy and alloy (i [...]
IFI
IFI-301
2008
English

GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES

All UN, UNJ, M, and MJ thread form gages shall be calibrated using the commonly accepted metrology techniques described in this standard using properly maintained standard metrology equipment. [...]
DIN
DIN 6340
1987
English

Washers for clamping devices

Washers for clamping devices as specified in DIN 6340 are designed to be used for clamps as specified in DIN 6314, DIN 6315 and DIN 6316. Their dimensions have thus been harmonized with the spe [...]
DIN EN
DIN EN 24033
1991
English

Style 2 hexagon nuts – Product grades A and B (ISO 4033 : 1979) English version of DIN EN 24 033

This International Standard gives specifications for hexagon nuts, style 2, with metric dimensions and thread diameters from 5 up to and including 36mm, with product grade A for sizes≤M16 and p [...]
JIS
JIS B 1055
1995
English

Tapping screws—Mechanical properties

This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together [...]
IFI
IFI-166
2007
English

INSPECTION PROCEDUR FOR THREAD NICKS – INCH SERIES

This standard establishes an inspection procedure to determine acceptability of thread nicks as they relate to screw thread assemblability. This procedure is intended to be used for bolts, scre [...]
SAE
SAE J123
1994
English

SURFACE DISCONTINUITIES ON BOLTS, SCREWS, AND STUDS IN FATIGUE APPLICATIONS

This SAE Recommended Practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and proc [...]
IFI
IFI-125
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF ADHESIVE COATED PREVAILING-TORQUE SCREWS

This standard establishes a conformance test procedure for the performance of adhesive coated prevailing-torque screws, in nominal screw sizes No. 4 thru 3/4 in. Torque values given in this st [...]