DIN EN 24033

Style 2 hexagon nuts – Product grades A and B (ISO 4033 : 1979) English version of DIN EN 24 033

English 1991

0.000

Detailed Information

This International Standard gives specifications for hexagon nuts, style 2, with metric dimensions and thread diameters from 5 up to and including 36mm, with product grade A for sizes≤M16 and product grade B for sizes>M16.

Download File

(Log in to download spec.)

Check out other specifications

ISO

ISO 1483

1983

English

Slotted raised countersunk (oval) head tapping screws (common head style)

This International Standard specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

IFI

IFI-138

2002

English

STRAIGHTNESS GAGING METHOD AND STRAIGHTNESS LIMITS FOR MACHINE, TAPPING, AND THREAD ROLLING SCREWS

This standard establishes a method for inspecting the out-of-straightness limits for machine, tapping, and thread rolling screws. Included are screws fully threaded or with thread lengths of at least 4D and screw lengths to and including 12 inches (D equals nominal screw diameter). For sc […]

ASTM

Abstract of ASTM A574

2000

English

ALLOY STEEL SOCKET HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket head cap screws, 0.060 through 4 in. in diameter where high strength is required. NOTE 1 - A complete metric companion to Specification ASTM A574 has been developed - A574M; therefore no me […]

ASME

ASME B18.6.2

2005

English

SLOTTED HEAD CAP SCREWS, SQUARE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES)

This Standard covers the complete general and dimensional data for the various styles of slotted head cap screws and square head and slotted headless set screws recognized as “American National Standard." Also included are appendices covering thread runout sleeve gages for cap screws, pro […]

ASTM

ASTM A574

2008

English

ALLOY STEEL SOCKET-HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement ar […]

Custom

General Motors | GM6174M

2001

English

Corrosion Protective Coatings Phosphate/Organic/Oil Type

This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, organic coating, oven bake, water and oil emulsion post treatment and air dry.