DIN EN 24034
Hexagon nuts – Product grade C (ISO 4034 : 1986) English version of DIN EN 24 034
English
1992
0.000
Detailed Information
This International Standard gives specifications for hexagon nuts . with thread diameters from M5 to M64 inclusive and product grade C.
Download File
(Log in to download spec.)
Check out other specifications
2001
English
GLOSSARY OF TERMS FOR MECHANICAL FASTENERS
This standard is a summary of nomenclature and terminology currently used to define and/or describe mechanical fasteners, related characteristics, and the manufacturing processes that produce these products. Utilization of these terms by manufacturers and consumers is intended to reduce o […]
2009
English
COMPRESSIBLE-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH STRUCTURAL FASTENERS
1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural bolt. 1.2 Four types of direct tension indicators in nominal diameter sizes 1/2 through 1-1/2 in. […]
1986
English
Slotted set screws with cone point (modified version of ISO 7434, 1983 edition )
This standard specifies the characteristics of M 1 to M 12 slotted set screws with cone point, assigned to product grade A. Where, for special purposes, the screws are to meet requirements differing from those specified in the present standard, e.g. in respect of material (hardness class) […]
2001
English
ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS
1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolts and nuts furnished to this specification are 5/8, 3/4, and 7/8 in. 1.3 The values stated in in […]
1999
English
Overview of European Standards for fasteners
This Supplement provides information relating to DIN 918 but no additional standard specifications.
1985
English
Gauges for taper pipe threads
This Japanese Industrial Standard specifies the taper thread gauge for pipe hereinafter referred to as the "thread gauge", to be used for the dimensional inspection of the taper external thread for pipe (R), taper internal thread for pipe (Rc) and parallel internal thread for pipe (Rp), w […]