DIN EN 24035

Hexagon thin nuts (chamfered) Product grades A and B (ISO 4035 : 1986) English version of DIN EN 24 035

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for chamfered hexagon thin nuts, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d M16.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 28745
1992
English

Half-length taper grooved pins (ISO 8745 : 1986) English version of DIN EN 28 745

This International Standard specifies the characteristics of half-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with […]
DIN
DIN 6900-5
1990
English

Screw and washer assemblies – Coarse threaded screws with captive conical spring washer

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, a […]
BS EN
BS EN 10025-2
2004
English

Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to f […]
DIN
DIN 435
1989
English

Square taper washers for use with I sections

Washers as specified In this standard are intended for use in structural bolting of I sections using bolts up to property class 5.6.
DIN
DIN 444
1983
English

Eyebolts

This edition of DIN 444 contains corrections which had become necessary due to an incorrect correlation between limiting sizes and types in the October 1981 edition of the standard.
DIN
DIN 979
2000
English

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B

This standard specifies dimensions and technical delivery conditions for sizes M6 to M52 coarse and fine pitch thread hexagon slotted nuts and castle nuts of product grades A (up to M16) an […]
SAE
SAE J493
1961
English

Rod Ends and Clevis Pins

The following publications form a part of the specification to the extend specified herein. Unless otherwise indicated the latest revision of SAE publications shall apply. SAE J1010-Emissi […]
ISO
ISO 898-2
2012
English

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread

This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature […]
DIN
DIN 6915
1989
English

High-strength hexagon nuts with large widths across flats for structural steel bolting

Hexagon nuts as specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts.