DIN EN 24036

Hexagon thin nuts – Product grade B (unchamfered) (ISO 4036 :1979) English version of DIN EN 24 036

English 1992

0.000

Detailed Information

This International Standard gives specifications for hexagon thin nuts with metric dimensions and thread diameters from 1,6 up to and including 10 mm and product grade B.

If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, for example ISO 261, ISO 898, ISO 965, ISO 4759/I.

Download File

(Log in to download spec.)

Check out other specifications

ASTM

Abstract of ASTM A574

2000

English

ALLOY STEEL SOCKET HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket head cap screws, 0.060 through 4 in. in diameter where high strength is required. NOTE 1 - A [...]

DIN EN

DIN EN 26157-1

1991

English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to general requirements (ISO 6157-1 : 1988) (English version of DIN EN 26 157 Part 1)

1.1 This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements. It applies to bolts, screws and studs with - nomi [...]

DIN

DIN 6884

1956

English

Taper Key Torque Transmission – Gib-head Parallel Keys – Dimensions and Application

No figures tor permissible variations of tapers on keys and in hub keyways have so tar been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]

DIN

DIN 6887

1968

English

Stressed-type Fastenings with Taper Action – Taper Keys with Gib Head – Keyways – Dimensions and Application

So far no permissible variations have been laid down for the taper on the key and in the keyway. If special conditions make necessary the observance of certain permissible variations these must [...]

JIS

JIS B 1124

2003

English

Drilling screws with tapping screw thread

This Standard is the Japanese Industrial Standard prepared based on first editions of ISO 15480 Hexagon washer head drilling screws with tapping screw thread, ISO 15481 Cross recessed pan head [...]

ASTM

ASTM A574

1998

English

Standard Specification for Alloy Steel Socket-Head Cap Screws

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required. NOTE 1-A co [...]

DIN

DIN 937

1983

English

Hexagon thin castle nuts (previous design)

This standard gives specifications for hexagon thin castle nuts with metric threads ranging from 6 to 52 mm nominal thread diameter, assigned to product grades A (up to and including 16 mm nomi [...]

DIN

DIN 7964

1990

English

Reduced shank bolts and screws with coarse thread

This standard specifies requirements for M 2,5 to M 30 bolts and screws ('bolts', for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the mino [...]

IFI

IFI-553

1999

English

METRIC DRIVE PIN BLIND RIVETS

This standard establishes the requirements for metric drive pin blind rivets suitable for use in joining the component parts of an assembly.