DIN EN 24766

Slotted set screws with flat point (ISO 4766 : 1983) English version of DIN EN 24 766

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of slotted set screws with flat point and thread sizes from M 1,2 to M 12 inclusive and product grade A.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM F837M
1991
English

STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in […]
JIS
JIS B 1123
1996
English

Hexagon head tapping screws

This Japanese Industrial Standard specifies the steel hexagon head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
DIN
DIN 557
1994
English

Product grade C square nuts

This standard specifies requirements for M 10 to M 12 square nuts assigned to product grade C. See DIN 962 (or the standards referred to therein) for special nut types or finishes. If, in s […]
DIN
DIN 267-18
1981
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Teile aus Nichteisenmetallen

Diese Norm gilt für mechanische Verbindungselemente mit Gewinde (im wesentlichen Schrauben und Muttern) als Fertigteile aus Nichteisenmetallen (Schwermetalle und Leichtmetalle) mit - metris […]
DIN
DIN 1445
1977
English

Clevis pins with head and stud end

The specifications of this standard are related to those of DIN EN 22340 and DIN EN 22341, the technical delivery conditions (cf. clauses 2 to 4) largely conforming to ISO 3269.
DIN
DIN 940
1995
English

Studs – with a length of engagement equal to about 2,5 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in light metals of low strength. As specified in DIN 267-2, the stud end thread shall […]
DIN EN
DIN EN 29692
1994
English

Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding – Joint preparation for steel (ISO 9692:1992) English version of DIN EN 29692

This International Standard pertains to types of joint preparation for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding on steel (see clauses 3 and 4 […]
ISO
ISO 7089
1983
English

Plain washers – Normal series – Product grade A

This International Standard lays down the specification for plain washers of product grade A, preferable for hexagon bolts, screws and nuts of product grades A and B with normal width acros […]
JIS
JIS B 0205-4
2001
English

ISO general purpose metric screw threads — Part 4: Basic dimensions

This Standard specifies the basic dimensions, in milimetres, of ISO metric screw threads in accordance with JIS B 0205-2. The values refer to the basic profile in accordance with JIS B 0205-1.