DIN EN 27434

Slotted set screws with cone point (ISO 7434 : 1983) English version of DIN EN 27 434

English 1992

0.000

Detailed Information

This International Standard specifies the characteristics of slotted set screws with cone point and thread sizes from M 1,2 to M 12 inclusive and product grade A.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 261

1987

English

T-head bolts

This standard specifies M8 to M100 x 6 T-head bolts. They are designed for use in attaching components to foundations or similar structures by means of T-sIots, such as are specified in DIN 649, where T-head bolts are considered adequate detachable fasteners.

JIS

JIS B 1124

2003

English

Drilling screws with tapping screw thread

This Standard is the Japanese Industrial Standard prepared based on first editions of ISO 15480 Hexagon washer head drilling screws with tapping screw thread, ISO 15481 Cross recessed pan head drilling screws with tapping screw thread, ISO 15482 Cross recessed countersunk head drilling sc […]

DIN EN

DIN EN 24015

1991

English

Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) Product grade B (ISO 4015: 1979) English version of DIN EN 24 015

This International Standard gives specifications for hexagon head bolts with metric dimensions and thread diameters from 3 up to and including 20 mm, with reduced shank (shank diameter ≈ pitch diameter), of product grade B.

DIN

DIN 1144

1973

English

Nails for the installation of wood wool composite panels

Nails shall be made of steel (grade at manufacturer's discretion) and have a galvanized (Zn) or metallized (me) finish.

DIN

DIN 946

1991

English

Determination of coefficient of friction of bolt/nut assemblies under specified conditions

This standard specifies a tightening test for determining the coefficient of friction of bolt/nut assemblies under specified conditions. It is only applicable for comparison purposes, such as a comparison of assemblies with different surface finishes or for cases where different lubricant […]

DIN

DIN 6900-5

1990

English

Screw and washer assemblies – Coarse threaded screws with captive conical spring washer

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, and a captive conical spring washer. Wave spring washers are intended to counteract loosening of bolt […]