DIN EN 27435
Slotted set screws with long dog point (ISO 7435: 1983) English version of DIN EN 27 435
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of slotted set screws with long dog point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
Download File
(Log in to download spec.)
Check out other specifications
2010
English
MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)
This Standard is intended to cover the complete general and dimensional data for the various types of slotted and recessed head machine screws, tapping screws, and metallic drive screws recognized as American National Standard. Also included are appendices that provide specifications and […]
1992
English
Hexagon head screws with metric fine pitch thread – Product grades A and B – (ISO 8676: 1988) – English version of DIN EN 28 676
This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diameters from 8 to 24 mm and nominal lengths, l, up to and including 10 d or 150 mm, whichever is sh […]
1990
English
Metal washers – Technical delivery conditions
This standard specifies requirements for metal washers manufactured by stamping (punching) which thus exhibit inside and outside rollover and fracture (cf. DIN6930 Part 2 and DIN6932). It does not cover washers manufactured by machining (e.g. by drilling or turning). This standard specif […]
1998
English
Standard Specification for Electrodeposited Coatings on Threaded Components [Metric]
1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fasteners and specifies coating thicknesses as well as hydrogen embrittlement relief for high-streng […]
1983
English
External tab washers (Locking tab washers)
This standard specifies requirements for external tab washers (previously known as locking tab washers), which are used in threaded fastenings. They are intended to prevent the fastening loosening off. The washer's effectiveness depends on the design conditions of the particular case and […]
1995
English
Slotted set screws
This Japanese Industrial Standard specifies the steel made slotted set screws (hereafter, referred to as "steel set screws"), and stainless steel made set screws (hereafter, referred to as "stainless steel set screws” ) for general use.