DIN EN 27436
Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
Download File
(Log in to download spec.)
Check out other specifications
2010
English
NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE
1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications. 1.2 Applicable nuts for use with bol […]
1987
English
Spring lock washers with square ends or tang ends
Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assembl […]
2001
English
ISO general purpose metric screw threads — Part 4: Basic dimensions
This Standard specifies the basic dimensions, in milimetres, of ISO metric screw threads in accordance with JIS B 0205-2. The values refer to the basic profile in accordance with JIS B 0205-1.
2001
English
Corrosion Protective Coatings Phosphate/Organic/Oil Type
This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, organic coating, oven bake, water and oil emulsion post treatment and air dry.
1976
English
Securing Parts for Rolling Bearings – Snap Rings for Bearings with Ring Groove
For connection with DIN 616 and ISO 464, see Explanations. This Standard specifies the dimensions of snap rings required for securing bearing with ring groove according to DIN 616, diameter series 0, 2, 3 and 4.