DIN EN 28674

Hexagon nuts, style 2, with metric fine pitch thread – Product grades A and B (ISO 8674 :1988) English version of DIN EN 28 674

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon nuts, style 2, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 36 mm, with product grade A for sizes d up to and including 16 mm and product grade B for sizes d over 16 mm.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1042
1998
English

Fasteners—Surface discontinuities— Part 2 : Nuts

This Standard establishes limits for various types of surface discontinuities on nuts. It applies to nuts with — nominal thread diameters from 5 mm up to and including 39 mm; — product grade [...]
ASTM
ASTM F2329
2005
English

ZINC COATING, HOT-DIP, REQUIREMENTS FOR APPLICATION TO CARBON AND ALLOY STEEL BOLTS, SCREWS, WASHERS, NUTS AND SPECIAL THREADED FASTENERS

1.1 This specification covers the requirements for hot-dip zinc coating applied to carbon steel and alloy steel bolts, screws, washers, nuts, and special threaded fasteners applied by the hot-d [...]
DIN
DIN 6912
1985
English

Hexagon socket thin head cap screws with pilot recess for wrench key

This standard specifies product grade A hexagon socket thin head cap screws with pilot recess for wrench key with ISO metric screw thread from M4 up to and including M36. If, in special cases, [...]
IFI
IFI-553
1999
English

METRIC DRIVE PIN BLIND RIVETS

This standard establishes the requirements for metric drive pin blind rivets suitable for use in joining the component parts of an assembly.
DIN
DIN 82
1973
English

Knurls

Compared with the January 1940 issue of DIN 82, the standard denomination "knurl" has been adopted for all types, since the previous denomination "diamond knurling" and "negative diamond knurli [...]
ISO
ISO 2936
2001
English

Assembly tools for screws and nuts — Hexagon socket screw keys

This International Standard specifies the dimensions, method of test, designation and marking of hexagon socket screw keys. It also specifies the minimum values of Rockwell hardness that shall [...]
DIN EN
DIN EN 10130
1991
English

Cold rolled flat steel products for cold forming – Technical delivery conditions – English version of DIN EN 10130

This European Standard applies to cold rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unles [...]
JIS
JIS B 1083
1990
English

General rules for tightening of threaded fasteners

This Japanese Industrial Standard specifies general matters relating to significance of tightening by combination of bolt and nut, basis of tightening and representative control method. Furthe [...]
DIN
DIN 982
1987
English

Prevailing torque type hexagon nuts with nonmetallic insert

This standard specifies requirements for M 5 to M 24 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for sizes [...]