DIN EN 28675

Hexagon thin nuts with metric fine pitch thread – Product grades A and B (ISO 8675 :1988) English version of DIN EN 28675

English 1992
0.000
Detailed Information

This International Standard gives specifications for hexagon thin nuts, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 64 mm, with product grade A for sizes d up to and including 16 mm and product grade B for sizes d over 16 mm.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 8676
1988
English

Hexagon head screws with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diame [...]
JIS
JIS B 0209-4
2001
English

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot -dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric external screw threads conforming to JIS B 0205-3 having a basic profile acco [...]
JIS
JIS B 0205-4
2001
English

ISO general purpose metric screw threads — Part 4: Basic dimensions

This Standard specifies the basic dimensions, in milimetres, of ISO metric screw threads in accordance with JIS B 0205-2. The values refer to the basic profile in accordance with JIS B 0205-1.
Custom
John Deere | JDM F15
2014
English

Specification for Electroplated Zinc Coatings on Fasteners

JDM F15 specifies requirements for electroplated zinc coatings for fasteners made of steel. JDM F15 applies primarily to electroplated coatings on threaded fasteners, non-threaded fasteners, an [...]
DIN
DIN 6923
1983
English

Hexagon nuts with flange

This standard gives specifications for hexagon nuts with flange, with metric coarse or fine thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to [...]
EN
EN 10088-3
1995
English

Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes

1.1 This part of EN 10088 specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods and sections of standard grades and special grades of stainless s [...]
DIN
DIN 6918
1990
English

Square taper washers for high-strength structural bolting of steel channel sections

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel channel sections in accordance with DIN 18 800 Part 1, together with DIN6914 bolts and DIN6915 nuts.
DIN
DIN 526
1973
English

Safety Cups for Cheese Head Screws according to DIN 84

Material: St 1303 according to DIN 1623 or St 3 according to DIN 1624 at manufacturer’s choice Finish: without burr
ASTM
ASTM F436M
2000
English

Standard Specification for Hardened Steel Washers [Metric]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. T [...]