DIN EN 28676

Hexagon head screws with metric fine pitch thread – Product grades A and B – (ISO 8676: 1988) – English version of DIN EN 28 676

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diameters from 8 to 24 mm and nominal lengths, l, up to and including 10 d or 150 mm, whichever is shorter, and of product grade B for nominal thread diameters over 24 mm or nominal lengths, l, over 10 d or 150 mm, whichever is shorter.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 967
1994
English

Product grade A cross recessed pan head screws with collar

This standard specifies requirements for M 3 to M 8 cross recessed pan head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or fin [...]
EN
EN 10204
2004
English

Metallic products – Types of inspection documents

1.1 This document specified the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e. [...]
ASTM
ASTM A368
2009
English

Standard Specification for Stainless Steel Wire Strand

1.1 This specification covers stainless steel wire strand composed of a multiplicity of round wires and suitable for use as guy wires, overhead ground wires, and similar purposes. 1.2 The value [...]
ASTM
Abstract of ASTM F1136
1998
English

CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners. 1.2 These coatings are applied by conventional dip-spin or dip- [...]
ISO
ISO 7379
1983
English

Hexagon socket head shoulder screws

This International Standard lays down the specification for hexagon socket head shoulder screws with metric dimensions and nominal shoulder diameters from 6,5 to 25 mm inclusive.
ISO
ISO 1481
1983
English

Slotted pan head tapping screws

This International Standard specifies the characteristics of slotted pan head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
DIN
DIN 562
1987
English

Square thin nuts Product grade B

This standard specifies requirements for M1,6 to M10 square thin nuts assigned to product grade B. If, in special cases, nuts are to comply with specifications other than those given in this st [...]
DIN
DIN 966
1971
English

Cross Recessed Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Normally these screws are made in the sizes for which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented according to [...]
ISO
ISO 15071
1999
English

Hexagon bolts with flange — Small series — Product grade A

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes 8.8 [...]