Material: Steel of at least 330 N/mm² (≈34 kp/mm²) tensile strength Steel of higher strengths or specified materials by agreement.

This Japanese Industrial Standard specifies the steel slotted head machine screws, herein after referred to as the "steel machine screws", brass slotted head machine screws, hereinafter referred to as the " brass machine screws", and stainless steel slotted head machine screws, hereinafte […]

Set out below are some guidelines for the application of tapping screws. The fastening methods shown are to be deemed as examples. Tapping screws of Type B with cone end (also known as seekers) are the type predominantly used. This applies particularly when several sheets have to be fast […]

This International Standard specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications others than those listed in this International Standard are required, they should be selected from […]

The following amendments have been made in comparison with the December 1970 edition of the present standard and the December 1970 edition of DIN 465. a) DIN 464 and DIN 465 have been combined into one standard. b) Symbol Sz has been included for the slotted design as specified in DIN 962 […]

This Standard specifies the general requirements for standardized bolts, screws, studs and nuts. It refers to the Standards on tolerances, mechanical and performance characteristics, geometrical features, surface discontinuities, surface finishes and quality aspects.