DIN EN 28749

Determination of shear strength of pins (ISO 8749 : 1986) English version of DIN EN 28 749

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the test method for shear testing of metallic pins with nominal diameters from 0,8 to 25 mm inclusive.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6915
1989
English

High-strength hexagon nuts with large widths across flats for structural steel bolting

Hexagon nuts as specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts.
BS EN
BS EN 12163
2011
English

Copper and copper alloys — Rod for general purposes

This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produ […]
EN ISO
EN ISO 3506-1
1997
English

Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs

This pan of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested o […]
JIS
JIS B 1045
2001
English

Fasteners—Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method

This Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric bolts, scre […]
DIN
DIN 6886
1967
English

Stressed-type Fastenings with Taper Action – Taper Keys – Keyways – Dimensions and Application

For the time being no permissible variations have been laid down for the taper on the key and in the hub keyway. If special conditions make necessary the observance of certain permissible v […]
DIN
DIN 267-10
1988
English

Fasteners – Technical delivery conditions – Hot-dip galvanized parts

Th s standard specifies the technical delivery conditions for fasteners (mainly screws. bolts and nuts) with an M 6 to M 36 coarse thread and provided with a zinc coating applied by hot-dip […]
BS EN
BS EN 10025-6
2009
English

Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (ch […]
JIS
JIS B 0209-3
2001
English

ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional screw threads

This Standard specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to JIS B 0205-2 having basic profile according to JIS B 0205-1. […]
DIN
DIN 7975
1970
English

Tapping Screws – Application and Core Hole Diameters

Set out below are some guidelines for the application of tapping screws. The fastening methods shown are to be deemed as examples. Tapping screws of Type B with cone end (also known as see […]