DIN EN 28750

Coiled, standard duty spring-type straight pins (ISO 8750 : 1987) English version of DIN EN 28 750

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of standard duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 0,8 to 20 mm inclusive.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7500-1
2000
English

ISO metric thread rolling screws Part 1: Types, designation and requirements

This standard specifies dimensions, the designation and requirements for design and dimensional accuracy of ISO metric thread rolling screws. For further dimensions, tolerances, materials, mech [...]
DIN
DIN 127
1987
English

Spring lock washers with square ends or tang ends

Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 [...]
ASTM
Abstract of ASTM A449
2000
English

QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required.
Custom
John Deere | JDM F15
2014
English

Specification for Electroplated Zinc Coatings on Fasteners

JDM F15 specifies requirements for electroplated zinc coatings for fasteners made of steel. JDM F15 applies primarily to electroplated coatings on threaded fasteners, non-threaded fasteners, an [...]
ASTM
ASTM A563
1997
English

Standard Specification for Carbon and Alloy Steel Nuts

1.1 This specification covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other external [...]
ISO
ISO 724
1993
English

ISO general-purpose metric screw threads – Basic dimensions

This International Standard specifies the basic dimensions, in millimetres, of ISO metric screw threads in accordance with ISO 261. The values refer to the basic profile in accordance with ISO 68.