DIN EN 28839

Mechanical properties of fasteners – Nonferrous metal bolts, screws, studs and nuts (ISO 8839 : 1986) (English version of DIN EN 28 839)

English 1991
0.000
DIN EN
Detailed Information

This International Standard specifies the mechanical properties of bolts, screws, studs and nuts
– with nominal thread diameters, d, from M1,6 to M39 inclusive;
– with metric ISO thread in accordance with ISO 261;
– made of copper and copper alloys or aluminium and aluminium alloys.

It does not apply to bolts, screws, studs and nuts with special property requirements such as
– corrosion resistance;
– electrical conductivity.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 917
1987
English

Hexagon cap nuts

This standard specifies requirements for M 4 to M 72 coarse and fine pitch thread hexagon cap nuts assigned to product grade A.
DIN
DIN 7983
1990
English

Cross recessed raised countersunk head tapping screws

DIN 7504 shall apply with regard to tapping screws with drilling tip (self-drilling screws). The DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for screws as covered […]
JIS
JIS B 1004
1975
English

Hole sizes before threading

This Japanese Industrial Standard specifies the diameters of holes to be drilled before threading the following screw threads or before carrying on similar works, hereinafter referred to as […]
DIN
DIN 6796
2009
German

Spannscheiben für Schraubenverbindungen

Diese Norm gilt für Spannscheiben, die kraftschlüssige, mitverspannte Federelemente für Verbindungen mit Schrauben der Festigkeitsklassen 8.8 bis 10.9 nach DIN EN ISO 898-1 darstellen. Bei […]
BS EN
BS EN 10025-3
2004
English

Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled del […]
DIN
DIN 1158
1973
English

Wall hooks

Wall hooks shall be made of steel (grade at manufacturer's discretion) and have a bright finish (bk).
ISO
ISO 4753
1983
English

Fasteners – Ends of parts with external metric ISO thread

This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise speci […]
DIN
DIN 906
1992
English

Hexagon socket pipe plugs

This standard specifies dimensions and technical delivery conditions for pipe plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 12, DIN 158, […]
JIS
JIS B 0176-3
2002
English

Threading tools—Vocabulary Part 3 : Chaser

This part of JIS B 0176 specifies terms and definitions related to the chaser to be used mainly for metal workings in general.