IFI-114

BREAK MANDREL BLIND RIVETS

English 2008
0.000
IFI
Detailed Information

This standard establishes the dimensional, mechanical, and performance requirements of inch series break mandrel blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under designation IFI-505.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 471
1981
English

Circlips (retaining rings) for shafts – Normal type and heavy type

Circlips within the meaning of this standard are retaining rings for holding structural components (e.g. rolling bearings) on shafts. They are given an eccentric shape, are fitted with spring r [...]
ASTM
ASTM B841
1999
English

Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

1.1 This specification covers the requirements for electrodeposited zinc nickel alloy coatings on metals.
DIN
DIN 302
1993
English

Steel countersunk head rivets with nominal diameters from 10 to 36 mm

This standard specifies dimensions of steel countersunk head rivets with nominal diameters from 10 to 36 mm.
IFI
IFI-155
2005
English

TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE NUTS-INCH SERIES

This standard establishes a test procedure for nonmetallic resistant element prevailing-torque nuts having coarse threads, to determine their conformance with specified prevailing-torque requir [...]
DIN
DIN 267-12
1971
English

Bolts, Screws, Nuts and Similar Threaded and Formed Parts – Technical Conditions of Delivery – Self-Tapping Screws

The provisions of this Standard supplement DIN 267 Part 1, Part 2, Part 5, Part 7 and Part 9 and apply to self-tapping screws made of heat-treated steel except when there are compelling reasons [...]
DIN
DIN 186
1988
English

T-head bolts with square neck

This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are specif [...]
ANSI ASME
Abstract of ANSI/ASME B1.2
2001
English

GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and dimensions for the th [...]
JIS
JIS B 0253
1985
English

Gauges for taper pipe threads

This Japanese Industrial Standard specifies the taper thread gauge for pipe hereinafter referred to as the "thread gauge", to be used for the dimensional inspection of the taper external thread [...]
ISO
ISO 14580
2001
English

Hexalobular socket cheese head screws

This International Standard specifies the characteristics of hexalobular socket cheese head screws in product grades A and with thread sizes from M2 up to and including M10.