IFI-126

BREAK MANDREL CLOSED END BLIND RIVETS

English 2008
0.000
IFI
Detailed Information

This standard establishes the dimensional, mechanical, and performance requirements of inch series break mandrel closed end blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under designation IFI-509.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 917
1987
English

Hexagon cap nuts

This standard specifies requirements for M 4 to M 72 coarse and fine pitch thread hexagon cap nuts assigned to product grade A.
ANSI
ANSI B18.2.3.2M
1995
English

METRIC FORMED HEX SCREWS

1.1 This standard covers the complete general and dimensional data for metric formed hex screws recognized as American National Standard. Formed hex screws are cold formed products with fully u [...]
DIN
DIN 7
1981
English

Parallel pins

Parallel pins in accordance with this 5tandard are designed for the fastening of two or more individual elements. A friction type connection can be achieved by the selection of suitable fits If [...]
DIN
DIN 7993
1970
English

Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores

The standard DIN 9045 contains snap rings capable of use in like manner for external and internal retaining duty. This necessarily entails a gap between the two ends of the wire to permit insta [...]
ASTM
Abstract of ASTM A563
2000
English

CARBON AND ALLOY STEEL NUTS

This specification covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts. studs. and other externally t [...]
DIN EN
DIN EN 24036
1992
English

Hexagon thin nuts – Product grade B (unchamfered) (ISO 4036 :1979) English version of DIN EN 24 036

This International Standard gives specifications for hexagon thin nuts with metric dimensions and thread diameters from 1,6 up to and including 10 mm and product grade B. If, in special cases, [...]