IFI-136

STUDS AND BENT BOLTS

English 2002
0.000
IFI
Detailed Information

This standard covers the general and dimensional requirements for various types of studs and bent bolts in nominal thread diameters 1-1/2 inches and smaller.

Section A details double end studs (Table 1); Section B details interference-thread double end studs (Table 2); Section C details continuous thread studs; Section D details stud bolts for pressure-temperature piping; and Section E details bent bolts.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1123
1996
English

Hexagon head tapping screws

This Japanese Industrial Standard specifies the steel hexagon head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
ISO
ISO 8676
1988
English

Hexagon head screws with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diameters from 8 to 24 mm and nominal lengths, l, up to and including 10 d or 150 mm, whichever is sh […]
ASTM
ASTM B841
1999
English

Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

1.1 This specification covers the requirements for electrodeposited zinc nickel alloy coatings on metals.
ASME
ASME B18.31.3
2009
English

THREADED RODS (INCH SERIES)

This Standard covers the complete general and dimensional data for inch series threaded rods recognized as American National Standard. Included are diameters #4 through 4 in. UNC, UNF, 8UN, and ACME in both right-and left-handed threads. At this time, there are no ISO standards for inch […]
ASTM
ASTM F837
2008
English

Standard Specification for Stainless Steel Socket Head Cap Screws

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch socket head cap screw (SHCS) with nominal thread 0.060 through 1.500 in. and intended for use in applications requiring general corrosion resistance. 1.2 Three groups of stainless steel alloys […]
IFI
IFI-126
2008
English

BREAK MANDREL CLOSED END BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series break mandrel closed end blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under designation IFI-509.