Check out other specifications
2000
English
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. 1.2 The product is produced in vari [...]
1985
English
Screw thread limit gauges for parallel pipe threads
This Japanese Industrial Standard specifies the limit gauges, hereinafter referred to as the "limit gauges for screw threads", to be used for dimensional inspection of parallel pipe threads (G) [...]
2004
English
Tapping screw washer assemblies with plain washers
This Standard specifies the requirements for tapping screw and plain washer assemblies with spaced threads from ST2.2 to ST9.5 inclusive, flat seating heads and mechanical properties in accorda [...]
2010
English
CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH PRESSURE OR HIGH TEMPERATURE SERVICE, OR BOTH
1.1 This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1/4 through 4 in. nominal. It also covers austenitic stainless steel nuts in the [...]
1992
English
Unhardened taper pins with external thread (ISO 8737 : 1986) English version of DIN EN 28 737
This International Standard specifies the characteristics of unhardened taper pins with external thread, and metric dimensions and nominal diameters, d1, from 5 to 50 mm inclusive.
2002
English
Threading tools—Vocabulary Part 4 : Thread rolling dies
This part of JIS B 0176 specifies terms and definitions related to thread rolling dies to be used mainly for metal workings in general.