ISO 14585

Hexalobular socket pan head tapping screws

English 2001
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 71511
1975
English

Gaskets for Oval Flanges

Gaskets according to this Standard are intended for oval flanges according to DIN 71501.
ASTM
Abstract of ASTM F468M
1993
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE [METRIC]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
DIN
DIN 6905
1990
English

Spring lock washers for screw and washer assemblies

Spring lock washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 3. They are designed for use with bolted connections with b [...]
JIS
JIS B 1042
1998
English

Fasteners—Surface discontinuities— Part 2 : Nuts

This Standard establishes limits for various types of surface discontinuities on nuts. It applies to nuts with — nominal thread diameters from 5 mm up to and including 39 mm; — product grade [...]
EN
EN 10088-3
1995
English

Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes

1.1 This part of EN 10088 specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods and sections of standard grades and special grades of stainless s [...]
JIS
JIS B 0210
1973
English

Limits of sizes and tolerances for unified coarse screw threads

This Japanese Industrial Standard specifies limits of sizes and tolerances for unified coarse screw threads specified in JIS B 0206-Unified Coarse Screw Threads, mainly used for the purpose of [...]
ASTM
ASTM A490
2010
English

STRUCTURAL BOLTS, ALLOY STEEL, HEAT TREATED, 150 KSI MINIMUM TENSILE STRENGTH

1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi. 1.2 These bolts are intended for use in s [...]
JIS
JIS B 1084
1990
English

Method of tightening test for threaded fasteners

This Japanese Industrial Standard specifies the method of test for obtaining characteristic value for tightening (hereafter referred to as "tightening characteristic value") by combination of b [...]
DIN
DIN 7997
1984
English

Cross recessed countersunk head wood screws

In previous editions of this standard, thread sizes 2,4 and 2,7 were included. In the March 1975 edition of this standard, these sizes were excluded from use in new designs. Because of the cont [...]