ISO 1483

Slotted raised countersunk (oval) head tapping screws (common head style)

English 1983
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 14579
2001
English

Hexalobular socket head cap screws

This International Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A.
IFI
IFI-160
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS – INCH SERIES

This standard establishes a conformance test procedure for the performance of pre-applied adhesive coatings applied to inch series nuts, in nominal sizes 1/4 thru 1 inch intended for application temperatures of - 40°F to 350°F. Torque values for performance level I and level ll given in […]
ISO
ISO/R 1501
1970
English

ISO MINIATURE SCREW THREADS

This ISO Recommendation specifies ISO miniature screw threads with thread sizes from 0.3 to 1.4 mm diameter. For technological and functional reasons the tolerancing system for these threads differs from the tolerancing system for ISO general purpose metric screw threads.
ASTM
Abstract of ASTM A153M
1995
English

ZINC COATING (HOT-DIP) ON IRON AND STEEL HARDWARE

1.1 This specification covers zinc coatings applied by the hot-dip process on iron and steel hardware. 1.2 This document is intended to be applicable to hardware items that are centrifuged or otherwise handled to remove excess galvanizing bath metal (free zinc). Coating weight requirement […]
IFI
IFI-560
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS- METRIC SERIES

This standard establishes a conformance test procedure for the performance of pre-applied adhesive coatings applied to metric series nuts, in nominal sizes M5 thru M20 intended for application temperatures of -40°C to 180°C. Torque values for performance level I and level II given in thi […]
IFI
IFI-155
2005
English

TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE NUTS-INCH SERIES

This standard establishes a test procedure for nonmetallic resistant element prevailing-torque nuts having coarse threads, to determine their conformance with specified prevailing-torque requirements in nominal sizes #10 thru 1 in. intended for application temperatures of - 49°F to 250°F. […]