ISO 15071

Hexagon bolts with flange — Small series — Product grade A

English 1999
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes 8.8, 9.8, 10.9 and A2-70.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 14399-4
2006
English

High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies – English version of DIN EN 14399-4:2006-06

This document specifies together with EN 14399-1 the requirements for assemblies of high-strength structural bolts and nuts of system HV suitable for preloaded joints with large widths across flats, thread sizes M 12 to M 36 and property classes 10.9/10. Bolt and nut assemblies to this d […]
BS EN ISO
BS EN ISO 2768-2
1989
English

General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications

This part of ISO 2768 is intended to simplify drawing indications and specifies general geometrical tolerances to control those features on the drawing which have no respective individual indication. It specifies general geometrical tolerances in three tolerance classes. This part of ISO […]
ASME
ASME B18.9
2007
English

PLOW BOLTS

1.1.1 This Standard covers general and dimensional data for inch series plow bolts recognized as “American National Standard." 1.1.2 The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production items. Consumers should […]
DIN
DIN 7998
1975
English

Threads and Thread Ends for Wood Screws

Designation of a wood screw thread of nominal diameter d1 = 4 mm: Thread 4 DIN 7998
IFI
IFI-160
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS – INCH SERIES

This standard establishes a conformance test procedure for the performance of pre-applied adhesive coatings applied to inch series nuts, in nominal sizes 1/4 thru 1 inch intended for application temperatures of - 40°F to 350°F. Torque values for performance level I and level ll given in […]
Custom
John Deere | JDM F21
2012
English

Fasteners, Hydraulic Connectors, Hose Fittings and Tube Assemblies — Specification for Zinc-Nickel Electroplated Coating Requirements

1.1 JDM F21 specifies the requirements for electroplated zinc nickel coating for fasteners (see note 1) or hydraulic connectors and hose fittings made of steel or of copper alloy. JDM F21 specifies coating thicknesses and other coating requirements, and gives recommendations for hydrogen […]