ISO 2009

Slotted countersunk head screws (common head style) – Product grade A

English 1983
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of slotted countersunk head screws in product grade A and with thread sizes M 1,6 to M 10 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 10269
1999
English

Steel and nickel alloys for fasteners with specified elevated and/or low temperature properties – English version of DIN EN 10269

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperature made of non-alloy and alloy (i [...]
DIN
DIN 558
1967
English

Hexagon Screws – Thread Approximately to Head – Metric Thread Type g

These screws are normally made in the sizes for which weight data are indicated. Sizes for which the weight data are emphasized by bold type are generally stocked commercially because they are [...]
DIN
DIN 97
1986
English

Slotted countersunk (flat) head wood screws

The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other [...]
JIS
JIS B 1013
1994
English

Countersunk head screws— Head configuration and gauging

This Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the resp [...]
JIS
JIS B 1111
1996
English

Cross recessed head screws

This Japanese Industrial Standard specifies the steel cross recessed head screws (hereafter, referred to as “steel screws” ), stainless steel cross recessed head screws (hereafter, referred to [...]
BS EN
BS EN 10025-1
2004
English

Hot rolled products of structural steels — Part 1: General technical delivery conditions

1.1 This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document specif [...]
ANSI
ANSI B18.2.4.5M
1990
English

METRIC HEX JAM NUTS

1.1 This standard covers the complete general and dimensional data for metric hex jam nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is no [...]
DIN
DIN 6928
1990
English

Hexagon washer head tapping screws

Hexagon washer head tapping screws are made with a DIN 7970 tapping screw thread that complies with the specifications of International Standard ISO 1478 :1983). It should be noted that, since [...]
DIN EN
DIN EN 24018
1992
English

Hexagon head screws – Product grade C (ISO 4018: 1988) English version of DIN EN 24 018

This International Standard gives specifications for hexagon head screws with threads from M5 up to and including M64, of product grade C.