ISO 2904
ISO metric trapezoidal screw threads – Basic dimensions
English
1977
5.001
Detailed Information
This International Standard specifies the basic dimensions for ISO metric trapezoidal screw threads according to ISO 2902.
The values refer to the basic profiles according to ISO 2901.
Download File
(Log in to download spec.)
Check out other specifications
2009
English
THREADED RODS (INCH SERIES)
This Standard covers the complete general and dimensional data for inch series threaded rods recognized as American National Standard. Included are diameters #4 through 4 in. UNC, UNF, 8UN, and ACME in both right-and left-handed threads. At this time, there are no ISO standards for inch […]
1998
English
SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING
SELF-LOCKING ELEMENT: (a) THE SELF-LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-F-18240. (b) FOR DESIGN AND USAGE LIMITATIONS, SEE MS15981. (c) LOCATION OF EFFECTIVE LOCKING AREA SHALL BE IN ACCORDANCE WITH MS15981. (d) MAXIMUM RING GAGE DIAMETER THAT LOCKING REGION OF SETSCREW MUST PA […]
1983
English
Hexagon flange bolts with reduced shank
This standard specifies product grade A hexagon flange bolts with metric coarse screw thread or metric fine screw thread from 5 up to and including 20 mm nominal thread diameter. If, in special cases, specifications other than those listed in this standard are required, e.g. different nom […]
2001
English
Aerospace Size Standard for O-Rings
This Aerospace Standard specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitabl […]
2009
English
Spring-type straight pins — Slotted, heavy duty
This International Standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter, d1, from 1 mm to 50 mm inclusive. NOTE The nominal diameters have been chosen in such a way th […]
1984
German
Mechanische Verbindungselemente – Technische Lieferbedingungen Oberflächenfehler an Muttern
Diese Norm ergänzt DIN 267 Teil 1, Teil 2, Teil 4, Teil 15 und Teil 23 sowie DIN ISO 898 Teil 2 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberflächenfehlern an Muttern mit Festigkeitsklassen nach DIN ISO 898 Teil 2 bzw. DI […]