ISO 2936

Assembly tools for screws and nuts — Hexagon socket screw keys

English 2001
0.000
ISO
Detailed Information

This International Standard specifies the dimensions, method of test, designation and marking of hexagon socket
screw keys. It also specifies the minimum values of Rockwell hardness that shall be met.

The specifications of this International Standard apply for tightening of hexagon socket screws for property class
less than or equal to 12.9 as defined in ISO 898-1 and for tightening of socket set screws as defined in ISO 898-5.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 261
1987
English

T-head bolts

This standard specifies M8 to M100 x 6 T-head bolts. They are designed for use in attaching components to foundations or similar structures by means of T-sIots, such as are specified in DIN […]
DIN
DIN 7981
1984
English

Cross recessed pan head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000-2-1 tabular layout of article characteristics shall apply for […]
ASME ANSI
ASME/ANSI B18.18.1M
1993
English

INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE FASTENERS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection […]
ASTM
Abstract of ASTM F1135
1999
English

CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic performance requirements for an electrolytic or mechanical coating of cadmium or zinc followed by a chromate and baked organic coating for ferrous an […]
DIN
DIN 967
1994
English

Product grade A cross recessed pan head screws with collar

This standard specifies requirements for M 3 to M 8 cross recessed pan head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or […]
ASTM
Abstract of ASTM F468M
1993
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE [METRIC]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number […]
NASM
NASM 16555
1999
English

PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER NOMINAL SIZE)

CARBON OR ALLOY STEEL PINS SHALL HAVE A CORE HARDNESS OF 47-58 HRC, AND A CASE HARDNESS OF 60 HRC MINIMUM. THE CORE HARDNESS OF THE PINS SHALL NOT IN ANY INSTANCE EXCEED THE CASE HARDNESS. […]
MIL
MIL-DTL-18240F
1997
English

FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250°F MAXIMUM

This specification defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, U […]
DIN
DIN 913
1980
English

Hexagon socket set screws with flat point – ISO 4026 modified

ISO 4026 specifies product grade A hexagon socket set screws with flat points with metric dimension and thread diameters from 1,6 up to and including 24 mm.