ISO 4014

Hexagon head bolts — Product grades A and B

English 1999
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is shorter and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever is shorter.

If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1, ISO 4753 and ISO 4759-1.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 4000-9
1986
English

Tabular layouts of article characteristics for bolts, pins, rivets, and keys

This standard specifies tabular layouts, in accordance with DIN 4000 Part 1, for standardized and non-standardized bolts, pins, rivets, and keys.
BS EN
BS EN 10027-1
2016
English

Designation systems for steels Part 1: Steel names

This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemi […]
JIS
JIS B 1115
1996
English

Slotted head tapping screws

This Japanese Industrial Standard specifies the steel slotted head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
ASTM
Abstract of ASTM A307
2000
English

CARBON STEEL EXTERNALLY THREADED STANDARD FASTENERS

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs, in sizes 1/4 in. through 4 in. The fasteners are designated by "Grade […]
DIN
DIN 7985
1972
English

Recessed Raised Cheese (Fillister) Head Screws

Normally, these screws are manufactured in the sizes for which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented a […]
ISO
ISO 2009
1983
English

Slotted countersunk head screws (common head style) – Product grade A

This International Standard specifies the characteristics of slotted countersunk head screws in product grade A and with thread sizes M 1,6 to M 10 inclusive.
DIN
DIN 7967
1970
English

Self Locking Counter Nuts

When the self locking counter nuts have electrolytically deposited surface protection it is essential that suitable treatment methods should be adopted in order to prevent hydrogen embrittlement.
BS EN
BS EN 10025-3
2004
English

Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled del […]
ASTM
Abstract of ASTM F844
2000
English

UNHARDENED STEEL WASHERS

1.1 This specification covers round and miscellaneous shape steel plain (flat) washers furnished in an unhardened condition. 1.2 The washers are intended for general use bolt, nut, and stud […]