ISO 4162
Hexagon flange bolts – Small series
English
1990
0.000
Detailed Information
This International Standard gives specifications for hexagon flange bolts, small series, with threads from M5 up to and including M16 and property classes 8.8 to 10.9 and A2·70.
Download File
(Log in to download spec.)
Check out other specifications
2002
English
STAINLESS STEEL SOCKET SET SCREWS
1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SSS). sizes 0.060 through 0.500 in. in two conditions, AF and CW.
1997
English
Hexagon bolts with flange — Heavy series
This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
1993
English
HARDENED STEEL WASHERS [METRIC]
1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M10 […]
1989
English
Steel stampings – General tolerances
This standard is intended to simplify drawings. It specifies general tolerances on linear and angular dimensions and on coaxiality and symmetry in four accuracy grades comprising f (fine), […]
1993
English
METRIC SOCKET SET SCREWS
1.1.1 This standard contains complete general and dimensional requirements for metric series socket set screws of nominal sizes from 1.6 mm to 24 mm recognized as American National Standard […]
1994
English
Countersunk flat head screws— Part 2 : Penetration depth of cross recesses
This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
1993
English
CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS
1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners. 1.2 These coatings are applied by conventional dip-spin or […]