ISO 4166

Hexagon nuts for fine mechanics – Product grade F

English 1979
0.000
ISO
Detailed Information

This International Standard gives specifications for hexagon nuu with thread diameters from 1 up to and including
1,4 mm, of product grade F.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-130
2008
English

STRUCTURAL SPLITTING SELF-PLUGGING PULL MANDREL BLIND RIVETS

This standard establishes the dimensional, mechanical and performance requirements for structural splitting self-plugging pull mandrel blind rivets suitable for use in engineering assemblies wh [...]
ASME
ASME B18.2.3.10M
1996
English

SQUARE HEAD BOLTS [METRIC SERIES]

This standard covers the general and dimensional data for standard metric series square head bolts.
ASTM
Abstract of ASTM F837M
1991
English

STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in appl [...]
JIS
JIS B 1123
1996
English

Hexagon head tapping screws

This Japanese Industrial Standard specifies the steel hexagon head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
DIN
DIN 557
1994
English

Product grade C square nuts

This standard specifies requirements for M 10 to M 12 square nuts assigned to product grade C. See DIN 962 (or the standards referred to therein) for special nut types or finishes. If, in speci [...]
DIN
DIN 267-18
1981
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Teile aus Nichteisenmetallen

Diese Norm gilt für mechanische Verbindungselemente mit Gewinde (im wesentlichen Schrauben und Muttern) als Fertigteile aus Nichteisenmetallen (Schwermetalle und Leichtmetalle) mit - metrischem [...]
DIN
DIN 1445
1977
English

Clevis pins with head and stud end

The specifications of this standard are related to those of DIN EN 22340 and DIN EN 22341, the technical delivery conditions (cf. clauses 2 to 4) largely conforming to ISO 3269.
DIN
DIN 940
1995
English

Studs – with a length of engagement equal to about 2,5 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in light metals of low strength. As specified in DIN 267-2, the stud end thread shall be p [...]
DIN EN
DIN EN 29692
1994
English

Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding – Joint preparation for steel (ISO 9692:1992) English version of DIN EN 29692

This International Standard pertains to types of joint preparation for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding on steel (see clauses 3 and 4). [...]