ISO 4757

Cross recesses for screws

English 1983
0.000
ISO
Detailed Information

This International Standard defines two types of cross recesses for screws:
– recess type H;
– recess type Z.
Included in this International Standard is a method of penetration gauging for both types.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 28737
1992
English

Unhardened taper pins with external thread (ISO 8737 : 1986) English version of DIN EN 28 737

This International Standard specifies the characteristics of unhardened taper pins with external thread, and metric dimensions and nominal diameters, d1, from 5 to 50 mm inclusive.
DIN
DIN 6791
1993
English

Semitubular pan head rivets with nominal diameters from 1,6 to 10 mm

This standard specifies dimensions of steel and nonferrous metal semitubular pan head rivets with nominal diameters from 1,6 to 10 mm.
DIN
DIN 427
1986
English

Slotted headless screws with chamfered end

This standard specifies the characteristics of M 1 to M 20 slotted headless screws with chamfered end. Where, for special applications, the screws are to meet requirements differing from those [...]
ASTM
ASTM F1941M
2005
English

Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

1.1 This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with metric screw threads. It specifies coating thickness [...]
DIN
DIN 912
1983
English

Hexagon socket head cap screws (modified version of ISO 4762)

This standard specifies product grade A hexagon socket head cap screws with metric screw threads and thread diameters from 1,4 to 100 mm. If, in exceptional cases, the screws are to meet requir [...]
DIN EN
DIN EN 28747
1992
English

Grooved pins with countersunk head (ISO 8747 : 1986) English version of DIN EN 28 747

This International Standard specifies the characteristics of countersunk head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metri [...]
IFI
IFI-166
2007
English

INSPECTION PROCEDUR FOR THREAD NICKS – INCH SERIES

This standard establishes an inspection procedure to determine acceptability of thread nicks as they relate to screw thread assemblability. This procedure is intended to be used for bolts, scre [...]
JIS
JIS B 1084
1990
English

Method of tightening test for threaded fasteners

This Japanese Industrial Standard specifies the method of test for obtaining characteristic value for tightening (hereafter referred to as "tightening characteristic value") by combination of b [...]
DIN
DIN 6330
1991
English

Hexagon nuts with a height of 1,5 d

This standard specifies hexagon nuts designed for use with bolts in assemblies that will be frequently disassembled and reassembled. They are provided with a spherical bearing face which, in co [...]