ISO 4759-2

Tolerances for fasteners – Part II: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics

English 1979
0.000
ISO
Detailed Information

This International Standard specifies the selection of tolerances for use in the preparation of ISO product standards for bolts, screws and nuts with thread diameters from 1 up to and including 3 mm and product grade F.

It is recommended that these tolerances should also be used for non-standardized fasteners.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 964
1970
English

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quote [...]
ANSI
ANSI B18.2.4.6M
1990
English

METRIC HEAVY HEX NUTS

1.1 This standard covers the complete general and dimensional data for metric heavy hex nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
JIS
JIS B 0205-3
2001
English

ISO general purpose metric screw threads — Part 3: Selected sizes for screws, bolts and nuts

This Standard specifies selected sizes for screws, bolts and nuts in the diameter range from 1 mm to 64 mm of ISO general purpose metric screw threads (M) having basic profile according to JIS [...]
ISO
ISO 4753
1983
English

Fasteners – Ends of parts with external metric ISO thread

This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise specified [...]
JIS
JIS B 0203
1999
English

Taper pipe threads

This Standard specifies taper pipe threads and is applicable to the threads used mainly for pressure-tight joints on the threads for jointing the pipes, pipe fittings, fluid machinery, etc. Th [...]
DIN
DIN 1445
1977
English

Clevis pins with head and stud end

The specifications of this standard are related to those of DIN EN 22340 and DIN EN 22341, the technical delivery conditions (cf. clauses 2 to 4) largely conforming to ISO 3269.
JIS
JIS B 1118
1995
English

Square head set screws

This Japanese Industrial Standard specifies the steel square head set screws (hereafter referred to as "steel set screws") and stainless steel square head set screws (hereafter referred to as " [...]
IFI
IFI-124
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS

This standard establishes a conformance test procedure for the performance of Nonmetallic Resistant Element Prevailing-Torque Screws (hereinafter called "REPT screw"), in nominal screw sizes No [...]
DIN EN
DIN EN 10083-2
1991
English

Quenched and tempered steels – Technical delivery conditions for unalloyed quality steels – English version of DIN EN 10083 Part 2

1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 2 and 3), — bars (see note 2), — rod, — wid [...]