ISO 4775

Hexagon nuts for high-strength structural bolting with large width across flats – Product grade B – Property classes 8 and 10

English 1984
0.000
ISO
Detailed Information

This International Standard gives specifications for large series hexagon, high-strength structural nuts with metric dimensions in property classes 8 and 10 and thread sizes from M12 up to and including M36 for use with high-strength structural bolts of property classes 8.8 and 10.9.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.1.2
2006
English

LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER

This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufactured heads after driving, driven heads, and hold-on (dolly bar) and rivet set impressions. Also […]
DIN
DIN 97
1986
English

Slotted countersunk (flat) head wood screws

The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws. b) Type g hes been replaced by product grade C. c) The content of the […]
ASME
Abstract of ASME B18.6.4
1998
English

THREAD FORMING AND THREAD CUTTING TAPPING SCREWS AND METALLIC DRIVE SCREWS

This standard covers the complete general and dimensional data for the various types of slotted and recessed head tapping screws and metallic drive screws recognized as "American National Standard." Also included are appendixes which provide specifications and instructions for protrusion […]
DIN
DIN 937
1983
English

Hexagon thin castle nuts (previous design)

This standard gives specifications for hexagon thin castle nuts with metric threads ranging from 6 to 52 mm nominal thread diameter, assigned to product grades A (up to and including 16 mm nominal thread diameter) and B (above 18 mm nominal thread diameter).
Custom
John Deere | JDM F13
2015
English

Specification for Non-Electrolytically Applied Zinc Flake Coatings

1.1 JDM F13 specifies requirements for nine grades of corrosion resistant non-electrolytically applied zinc flake coatings on ferrous parts, with three levels of corrosion resistance, and three levels of lubricity. 1.2 JDM F13 coatings are specified in terms of ISO 10683. 1.3 JDM F13 coat […]
ASME
ASME B18.2.2
2010
English

NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)

This Standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, recognized as American National Standard. Also included are appendices covering gaging of slots in slotted […]