ISO 7040

Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10

English 2012
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert), with threads from M3 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8 and 10.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM F467
2001
English

NONFERROUS NUTS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general servi [...]
DIN EN
DIN EN 10269
2006
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006

Diese Europäische Norm EN 10269 legt die Anforderungen an Halbzeug, Stäbe und Draht für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen aus unlegierten und legier [...]
JIS
JIS B 0201
1973
English

Miniature screw threads

This Japanese Industrial Standard specifies basic profile, formulas, basic dimensions, classes, limits of sizes and tolerances for miniature screw threads of nominal diameter 0.3 to 1.4 mm used [...]
DIN
DIN 961
1970
German

Sechskantschrauben- Gewinde annähernd bis Kopf – Metrisches Feingewinde – Ausführung m und mg

Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt. Technische Lieferbedingungen nach DIN 267
IFI
IFI-143
2007
English

TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP ON BOTH EXTERNALLY AND INTERNALLY THREADED FASTENERS

This standard provides a test method for determining the torque-tension relationship on both external and internal threaded fasteners for the purpose of measuring the frictional characteristics [...]
ASTM
ASTM F959M
1997
English

Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]

1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural b [...]
DIN EN
DIN EN 24032
1992
English

Hexagon nuts, style 1 – Product grades A and B (ISO 4032 :1986) English version of DIN EN 24032

This International Standard gives specifications for hexagon nuts, style 1, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d < M16 and product grade B for size [...]
ANSI ASME
ANSI/ASME B18.10
2000
English

TRACK BOLTS

All types of track bolts and nuts used by the various railroads and electric railways in the United States and Canada were studied by the committee, and it is their belief that the recommended [...]
Others
IS 1367-2
2002
English

TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 2 TOLERANCES FOR FASTENERS — BOLTS, SCREWS, STUDS AND NUTS — PRODUCT GRADES A, B AND C

This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade [...]