ISO 7049

Cross recessed pan head tapping screws

English 1983
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of cross recessed pan head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 928
1983
English

Square weld nuts

The May 1970 edition of DIN 928 specified property class 8 with the suffix "weldable" for weld nuts. In the meantime, the proof loads for nuts in international specifications have been raised ( [...]
DIN EN
DIN EN 28751
1992
English

Coiled, light duty spring-type straight pins (ISO 8751 : 1987) English version of DIN EN 28 751

This International Standard specifies the characteristics of light duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 8 mm inclusive.
ISO
ISO 1479
1983
English

Hexagon head tapping screws

This International Standard specifies the characteristics of hexagon head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
JIS
JIS B 1082
1987
English

Stress area and bearing area for threaded fasteners

This Japanese Industrial Standard specifies the stress area of metric screw thread and the area of the part where a load due to the contact of the bearing surface of threaded fastener and the o [...]
DIN
DIN 267-4
1983
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Festigkeitsklassen für Muttern (bisherige Klassen)

Im Jahre 1967 wurde die Norm DIN 267 Teil 4 auf internationale Festigkeitsklassen für Muttern umgestellt. Die alten Kennzeichen 4D, 5D, 5S, 6G, 6S und 8G wurden durch die Kennzahlen 4, 5, 6, 8, [...]
DIN
DIN 8243
1969
English

Slotted Cheese Head Screws for Fine Mechanics M 0.3 to M 1.4

In the field of fine mechanics space conditions are often difficult, so that the correlation of a single head size to a given thread diameter fails to meet the requirements arising in applicati [...]
IFI
IFI-115
2007
English

FLANGE 12-POINT SCREWS

IFI-115 is a standard developed through the procedures of Industrial Fasteners Institute. IFI-115 was first published in 1970 and modestly revised and reissued in 1986 and 2002.
DIN EN
DIN EN 22341
1992
English

Clevis pins with head (ISO 2341 : 1986) English version of DIN EN 22 341

This International Standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
DIN
DIN 267-9
1979
English

Mechanical Fasteners – Technical Conditions of Delivery – Components with Electroplated Coatings

These technical conditions of delivery apply to mechanical fasteners (mainly bolts and nuts) with electroplated coatings.
2.01