ISO 7051

Cross recessed raised countersunk (oval) head tapping screws

English 1983
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of cross recessed raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7380-1
2011
English

Button head screws — Part 1: Hexagon socket button head screws

This International Standard specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability ac [...]
DIN
DIN 1144
1973
English

Nails for the installation of wood wool composite panels

Nails shall be made of steel (grade at manufacturer's discretion) and have a galvanized (Zn) or metallized (me) finish.
ASTM
ASTM F606
2010
English

TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS

1.1 These test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners, washers, direct tension ind [...]
ISO
ISO 7416
1984
English

Plain washers, chamfered, hardened and tempered for high-strength structural bolting

This International Standard specifies those hardened and tempered circular washers intended for assembIy with large series hexagon high-strength Structural bolts and nuts of diameters from M12 [...]
DIN
DIN 5418
1993
English

Mounting dimensions of rolling bearings

This standard gives design details of shoulders of shafts and housings, in or on which rolling bearings are to be seated. Compliance with the values specified precludes distortion of the bearin [...]
JIS
JIS B 1058
1995
English

Mechanical properties of fasteners Part 7 : Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

This Standard specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accordance wi [...]
JIS
JIS B 1001
1985
English

Diameter of clearance holes and counter bores for bolts and screws

This Japanese Industrial Standard specifies the diameters of clearance holes, hereinafter referred to as the "bolt hole diameters", and the diameters of counterbores for bolts, machine screws, [...]
DIN
DIN 964
1970
English

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quote [...]
ASME
ASME B18.2.6
2011
English

FASTENERS FOR USE IN STRUCTURAL APPLICATIONS

1.1.1 This Standard covers the complete general and dimensional data for five products in the inch series recognized as an American National Standard. These five structural products include: a. [...]