ISO 7091

Plain washers – Normal series – Product grade C

English 2000
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of normal-series, product-grade-C plain washers in the 100 HV hardness class and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive.

Washers of hardness class 100 HV are suitable for
-hexagon bolts and screws of product grade C in property classes up to and including 6.8;
-hexagon nuts of product grade C in property classes up to and including 6;
-case-hardened thread rolling screws.

If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887.

When soft material pieces are clamped, or large clearance holes in the workpiece are used, the user should check the technical suitability of this type of washer.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 547
1986
English

Round nuts with drilled holes in one face

Round nuts with drilled holes in one face are parts generally made of steel, stainless steel or non-ferrous metals, which are designed to be used for various purposes, as for instance in el […]
DIN
DIN 7504
1995
English

Self-drilling tapping screws – Dimensions, requirements and testing

This standard specifies dimensions. requirements and test methods for heat-treated self-drilling tapping screws ('tapping screws' for short). These screws have a drill point with which they […]
ASME
ASME B18.2.2
2010
English

NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)

This Standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, recogn […]
DIN
DIN 82
1973
English

Knurls

Compared with the January 1940 issue of DIN 82, the standard denomination "knurl" has been adopted for all types, since the previous denomination "diamond knurling" and "negative diamond kn […]
DIN
DIN 1160
1973
English

Clout or slate nails

Clout or slate nails shall be made of steel (grade at manufacturer’s discretion) and have a bright (bk) or galvanized (zn) finish.
JIS
JIS B 1005
2003
English

General purpose bolts and screws — Metric series — Radii under the head

This Standard specifies the sizes of the radii under the head and the transition diameters of metric series general purpose bolts and screws.
ISO
ISO 7092
2000
English

Plain washers – Small series – Product grade A

This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diame […]
ASTM
ASTM A325M
1997
English

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]

1.1.1 Type 1-Bolts made of medium-carbon steel. 1.1.2 Type 2-Bolts made from what is generally described as low-carbon martensite steel. 1.1.3 Type 3-Bolts made of steel having atmospheric […]
DIN
DIN 6908
1995
English

Conical spring washers for screw and washer assemblies

This standard specifies dimensions and technical delivery conditions for conical spring washers which are intended for use with screw and washer assemblies as specified in DIN 6900-5. They […]