ISO 7094
Plain washers – Extra large series – Product grade C
English
1983
0.000
Detailed Information
This International Standard lays down the specification for plain washers of product grade C with large outside diameter, preferable for bolts, screws and nuts in wood constructions, with thread sizes from M 5 to M 36 inclusive.
Download File
(Log in to download spec.)
Check out other specifications
2006
English
CARBON AND ALLOY STEEL COMPRSSIBL-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH CAP SCREWS, BOLTS, ANCHORS, AND STUDS
1.1 This specification covers the requirements for carbon and alloy steel compressible-washer-type direct tension indicators capable of indicating a specified bolt tension in cap screws, bolts, anchors, and studs. 1.2 Direct tension indicators in nominal diameter sizes 1/4 through 2-1/2 i […]
2007
English
STEEL SELF-PIERCING TAPPING SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO WOOD STUDS OR STEEL STUDS
1.1 This specification covers steel self-piercing tapping screws for use in fastening gypsum panel products and metal plaster bases to cold-formed steel studs less than 0.033 in. (0.84 mm) in thickness and wood members and for fastening gypsum panel products to gypsum board. 1.2 This spe […]
2011
English
Fasteners – Ends of parts with external ISO metric thread
This International Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt, screw and stud ends) recommended for use. They apply to standardized or non-standardized threaded parts. For each end type, a symbol is specified and it is int […]
1990
English
Curved spring washers for screw and washer assemblies
Curved spring washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 2. They are designed for use with bolted connections with bolts of a property class below 5.8 (as specified in ISO 898 Part 1). Curved spring washers are […]
1992
English
Clevis pins with head (ISO 2341 : 1986) English version of DIN EN 22 341
This International Standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.