ISO 7378
Fasteners – Bolts, screws and studs – Split pin holes and wire holes
English
1983
0.000
Detailed Information
This International Standard lays down the dimensions and position of split pin holes and wire holes for bolts, screws and studs, recommended for use unless otherwise specified in the appropriate product standard.
Download File
(Log in to download spec.)
Check out other specifications
2007
English
Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
1.1 This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil to chemical compositions. Cold-finished bars are suitable for heat treatment, for machining into components, or for use in the as-finished condition as shafting, or in construction […]
2002
English
STAINLESS STEEL BOLTS, HEX CAP SCREWS, AND STUDS
1.1 This specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in. nominal diameter inclusive in a number of alloys in common use and intended for service applications requiring general corrosion resistance.
2008
German
Scheibenräder für Kraftwagen und Anhängefahrzeuge – Teil 2: Befestigungselemente für Bolzenzentrierung
Diese Norm gilt für Befestigungselemente von bolzenzentrierten Scheibenrädern aller Art an Kraftwagen und Anhängefahrzeugen.
1985
English
Hexagon socket thin head cap screws
This standard specifies product grade A hexagon socket thin head cap screws with ISO metric screw thread from size M3 up to and including size M 24. If, in special cases, the screws are to meet requirements other than those given in this standard, e.g. with regard to property class or ma […]
2006
English
CARBON AND ALLOY STEEL COMPRSSIBL-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH CAP SCREWS, BOLTS, ANCHORS, AND STUDS
1.1 This specification covers the requirements for carbon and alloy steel compressible-washer-type direct tension indicators capable of indicating a specified bolt tension in cap screws, bolts, anchors, and studs. 1.2 Direct tension indicators in nominal diameter sizes 1/4 through 2-1/2 i […]
1984
English
Plain washers, chamfered, hardened and tempered for high-strength structural bolting
This International Standard specifies those hardened and tempered circular washers intended for assembIy with large series hexagon high-strength Structural bolts and nuts of diameters from M12 to M36 inclusive.