ISO 7380

Hexagon socket button head screws – Metric series

English 1983
0.000
ISO
Detailed Information

This International Standard lays down the specification for hexagon socket button head screws with thread sizes from M 3 to M 16 inclusive.

Download File
(Log in to download spec.)

Check out other specifications

Custom
General Motors | GM6174M
2001
English

Corrosion Protective Coatings Phosphate/Organic/Oil Type

This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, orga […]
DIN
DIN 908
1992
English

Hexagon socket screw plugs

This standard specifies dimensions and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 5, 6 or 7, […]
DIN
DIN 7984
1985
English

Hexagon socket thin head cap screws

This standard specifies product grade A hexagon socket thin head cap screws with ISO metric screw thread from size M3 up to and including size M 24. If, in special cases, the screws are to […]
ASTM
ASTM F1554
2007
English

ANCHOR BOLTS, STEEL, 36, 55, AND 105-KSI YIELD STRENGTH

1.1 This specification covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength low-alloy steel anchor bolts (also known as anchor rods). The anchor bolt […]
DIN EN
DIN EN 14399-4
2006
English

High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies – English version of DIN EN 14399-4:2006-06

This document specifies together with EN 14399-1 the requirements for assemblies of high-strength structural bolts and nuts of system HV suitable for preloaded joints with large widths acro […]
DIN
DIN 938
1995
English

Studs – with a length of engagement equal to about 1 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in steel. As specified in DIN 267-2, the stud end thread shall be produced to toleranc […]
DIN
DIN 705
1955
English

Bright Set Collars, Locked by Grub Screws or by Pins, Light Pattern Series

Set collars to Type A are furnished with grub screw to DIN 553.
DIN
DIN 7997
1984
English

Cross recessed countersunk head wood screws

In previous editions of this standard, thread sizes 2,4 and 2,7 were included. In the March 1975 edition of this standard, these sizes were excluded from use in new designs. Because of the […]
DIN EN
DIN EN 24034
1992
English

Hexagon nuts – Product grade C (ISO 4034 : 1986) English version of DIN EN 24 034

This International Standard gives specifications for hexagon nuts . with thread diameters from M5 to M64 inclusive and product grade C.