ISO 7415

Plain washers for high-strength structural bolting, hardened and tempered

English 1984

0.000

Detailed Information

This International Standard specifies those hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts of diameters from M12 to M36 inclusive.

Download File

(Log in to download spec.)

Check out other specifications

JIS

JIS B 1091

2003

English

Fasteners—Acceptance inspection

This Standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or rejected in case […]

ISO

ISO 7042

2012

English

Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads […]

ASTM

Abstract of ASTM F594

2002

English

STAINLESS STEEL NUTS

1.1 This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in. in nominal diameter inclusive in a number of alloys in common use and intended for service applicati […]

DIN

DIN 7338

1993

English

Brake and clutch lining rivets

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal rivets for use with brake and clutch linings as employed in automotive engineering.

DIN EN

DIN EN 20898-1

1992

English

Mechanical properties of fasteners – Bolts, screws and studs (ISO 898-1 : 1988) English version of DIN EN 20 898 Part 1

This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1) . Properties will vary at higher and lower temperature.

ASTM

ASTM F912M

1997

English

Standard Specification for Alloy Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.

ISO

ISO 4755

1983

English

Fasteners – Thread undercuts for external metric ISO threads

This International Standard lays down the form and dimensions of thread undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where an und […]

DIN EN

DIN EN 10083-1

2006

German

Vergütungsstähle – Teil 1: Allgemeine technische Lieferbedingungen; Deutsche Fassung EN 10083-1:2006

Dieser Teil der EN 10083 enthält die allgemeinen technischen Lieferbedingungen für ⎯ Halbzeug, warmgeformt, zum Beispiel Vorblöcke, Knüppel, Vorbrammen (siehe Anmerkungen 2 und 3), ⎯ Stabst […]

DIN

DIN 7996

1986

English

Cross recessed pan head wood screws

As a departure from DIN 7996, March 1975 edition (which was withdrawn in December 1984), the present edition specifies a second type of cross recess, viz. cross recess type Z, also referred […]