ISO 7719

Prevailing torque type all-metal hexagon nuts, style 1 – Property classes 5, 8 and 10

English 1983
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts with thread sizes from M 5 to M 36 inclusive, in property classes 5, 8 and 10, and product grades A (d ≤ M 16) and B (d > M 16).

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-534
1999
English

METRIC BEVELED WASHERS

This standard covers metric steel beveled washers, in nominal sizes 12 thru 36 mm, intended for use with American Standard beams and channels in structural applications to compensate for the lack of parallelism where an outer face of the members to be joined has a slope approximately 1:6 […]
DIN EN
DIN EN 28748
1992
English

Coiled, heavy duty spring-type straight pins (ISO 8748 : 1987) English version of DIN EN 28 748

This International Standard specifies the characteristics of heavy duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 20 mm inclusive.
DIN
DIN 427
1986
English

Slotted headless screws with chamfered end

This standard specifies the characteristics of M 1 to M 20 slotted headless screws with chamfered end. Where, for special applications, the screws are to meet requirements differing from those specified in the present standard, e.g. in respect of material (hardness class) or intermediate […]
BS EN ISO
BS EN ISO 15330
1999
English

Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method

This International Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric bolts, screws and studs; — thread rolling screws; — self-tapping screws; — self-drilling screws; […]
JIS
JIS B 0209-5
2001
English

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric internal screw threads conforming to JIS B 0205-3 having basic profile according to JIS B 0205-1. Internal screw threads according to this Standard are intended to mate wit […]
DIN EN
DIN EN 28739
1992
English

Full-length parallel grooved pins, with pilot (ISO 8739 : 1986) English version of DIN EN 28 739

This International Standard specifies the characteristics of full-length parallel grooved pins with pilot which have three equally spaced grooves impressed longitudinally on their exterior surface and a pilot to facilitate insertion, with metric dimensions and nominal diameter, d1, from 1 […]