ISO 7721-2
Countersunk flat head screws – Part 2: Penetration depth of cross recesses
English
1990
0.000
Detailed Information
This part of ISO 7721 specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
Download File
(Log in to download spec.)
Check out other specifications
2008
English
SERRATED HEX FLANGE LOCKNUTS 90,000 psi (INCH SERIES)
This Standard covers the general, dimensional, and mechanical performance requirements for low strength carbon steel, case hardened, regular and large serrated flange locknuts (inch series), recognized as American National Standard.
2000
English
Hexagon socket head cap screws
This Standard specifies the characteristics of hexagon socket head cap screws with threads from M1.6 up to and including M64 and product grade A. Gauging of hexagon sockets is specified in Annex A. For approximate masses of screws see Annex B. If, in special cases, specifications other […]
1998
English
INSPECTION AND QUALITY ASSURANCE PLAN REQUIRING IN-PROCESS INSPECTION AND CONTROLS
This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. The basic structure of this plan outlines the q […]
2007
English
TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS – INCH SERIES
This standard establishes a conformance test procedure for the performance of pre-applied adhesive coatings applied to inch series nuts, in nominal sizes 1/4 thru 1 inch intended for application temperatures of - 40°F to 350°F. Torque values for performance level I and level ll given in […]
1997
English
Threaded fasteners— Axial load fatigue testing— Test methods and evaluation of results
This Japanese Industrial Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results. Unless otherwise agreed, the tests are of the fluctuating tension type and are carried out at room tem […]
2001
English
Fasteners—Electroplated coatings
This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement relief for fasteners with high tensile strength or hardness and for surface-hardened fasteners. Thi […]