ISO 8765

Hexagon head bolts with metric fine pitch thread – Product grades A and B

English 1988
0.000
ISO
Detailed Information

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diameters d from 8 to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is shorter, and of product grade B for nominal thread diameters d over 24 mm or nominal lengths over 10d or 150 mm, whichever is shorter.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0002-3
1998
English

Technical drawings—Screw threads and threaded parts—Part 3 : Simplified representation

This part of JIS B 0002 establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in JIS B 0002-2. This representa […]
BS ISO
BS ISO 1891
2009
English, French, Russian

Fasteners – Terminology

This International Standard provides translation guidance for terms commonly used to describe fasteners. This International Standard lays down the terminology of fasteners in English, Frenc […]
DIN EN
DIN EN 1665
1998
English

Hexagon bolts with flange – Heavy series – English version of DIN EN 1665

This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
ISO
ISO 4753
2011
English

Fasteners – Ends of parts with external ISO metric thread

This International Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt, screw and stud ends) recommended for use. They apply to stan […]
Custom
General Motors | GM6174M
2001
English

Corrosion Protective Coatings Phosphate/Organic/Oil Type

This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, orga […]
DIN
DIN 966
1984
English

Cross recessed raised countersunk (oval) head screws

If raised countersunk oval head screws with length tabled below the stepped line are to be supplied threaded up to the head, i.e. deviating from the standard design, the letter A shall be i […]
DIN EN
DIN EN 24015
1991
English

Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) Product grade B (ISO 4015: 1979) English version of DIN EN 24 015

This International Standard gives specifications for hexagon head bolts with metric dimensions and thread diameters from 3 up to and including 20 mm, with reduced shank (shank diameter ≈ pi […]
DIN
DIN 940
1995
English

Studs – with a length of engagement equal to about 2,5 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in light metals of low strength. As specified in DIN 267-2, the stud end thread shall […]
JIS
JIS B 1014
1994
English

Countersunk flat head screws— Part 2 : Penetration depth of cross recesses

This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).