ISO 887

Plain washers for metric bolts, screws and nuts – General plan

English 1983
0.000
ISO
Detailed Information

This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive.

This International Standard does not apply to washers for preassembled bolts and screws as far as the hole diameters are concerned.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 26157-1
1991
English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to general requirements (ISO 6157-1 : 1988) (English version of DIN EN 26 157 Part 1)

1.1 This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements. It applies to bolts, screws and studs with - nomi [...]
ISO
ISO 2901
1977
English

ISO metric trapezoidal screw threads – Basic profile and maximum material profiles

This International Standard specifies the basic profile and maximum material profiles of ISO metric trapezoidal screw threads.
ISO
ISO 14585
2001
English

Hexalobular socket pan head tapping screws

This International Standard specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive.
ASME
ASME B18.1.1
2006
English

SMALL SOLID RIVETS 7/16 IN. NOMINAL DIAMETER AND SMALLER

This standard covers complete general and dimensional data for those types of small solid rivets recognized as “American National Standard." All other types of small solid rivets, within the li [...]
ASTM
ASTM F879
2010
English

STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread 0. [...]
ASTM
ASTM F812/F812M
1997
English

Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts with nominal diam [...]
DIN
DIN 928
1983
English

Square weld nuts

The May 1970 edition of DIN 928 specified property class 8 with the suffix "weldable" for weld nuts. In the meantime, the proof loads for nuts in international specifications have been raised ( [...]
DIN
DIN 917
2000
English

Hexagon cap nuts

This standard specifies dimensions and technical delivery conditions for sizes M4 to M72 coarse and fine pitch thread hexagon cap nuts of product grade A.
Others
BS ISO 1891
2009
English, French, Russian

Fasteners – Terminology

This International Standard provides translation guidance for terms commonly used to describe fasteners. This International Standard lays down the terminology of fasteners in English, French an [...]