ISO 965-3

ISO general purpose metric screw threads – Tolerances – Part 3 : Deviations for constructional threads

English 1980
0.000
ISO
Detailed Information

This International Standard specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads conforming to ISO 261, ISO general purpose metric screw threads – General plan.

The deviations specified are derived from the fundamental deviations and tolerances specified in ISO 965/1.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 797
1970
English

Special Foundation Bolts

Strength category (material): 3.6 according to DIN 267 Part 3 Other strength categories or materials by agreement
DIN EN
DIN EN 24033
1991
English

Style 2 hexagon nuts – Product grades A and B (ISO 4033 : 1979) English version of DIN EN 24 033

This International Standard gives specifications for hexagon nuts, style 2, with metric dimensions and thread diameters from 5 up to and including 36mm, with product grade A for sizes≤M16 and p [...]
DIN
DIN 7967
1970
English

Self Locking Counter Nuts

When the self locking counter nuts have electrolytically deposited surface protection it is essential that suitable treatment methods should be adopted in order to prevent hydrogen embrittlement.
DIN
DIN 267-9
1979
English

Mechanical Fasteners – Technical Conditions of Delivery – Components with Electroplated Coatings

These technical conditions of delivery apply to mechanical fasteners (mainly bolts and nuts) with electroplated coatings.
ASTM
ASTM F468
2010
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys i [...]
DIN
DIN 1151
1973
English

Round plain head and countersunk head wire nails

Wire nails shall be made of steel (grade at manufacturer's discretion) and have a bright (bk), galvanized (zn) or metallized (me) finish.
IFI
IFI-134
2008
English

MULTI-GRIP FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical and performance requirements of multi-grip flush break, positive lock pull mandrel self-plugging blind rivets suitable for use in joining t [...]
DIN EN
DIN EN 10269 Berichtigung 1
2006
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07; Deutsche Fassung EN 10269:1999/A1:2006/AC:2006

Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.
NASM
NASM 35338
2002
English

WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES

a. CARBON STEEL WASHERS SHALL HAVE A HARDNESS OF 38 TO 46HRC. b. CORROSION-RESISTANT STEEL WASHERS TYPE 420 (UNS S42000) SHALL HAVE A HARDNESS OF 45-53 HRC, AND TYPE 300 (UNS S3XXXX) SERIES WAS [...]