ISO/R 1501
ISO MINIATURE SCREW THREADS
English
1970
0.000
Detailed Information
This ISO Recommendation specifies ISO miniature screw threads with thread sizes from 0.3 to 1.4 mm diameter.
For technological and functional reasons the tolerancing system for these threads differs from the tolerancing system for ISO general purpose metric screw threads.
Download File
(Log in to download spec.)
Check out other specifications
1985
English
Square head bolts with collar
This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from those specified in the present standard, e. g. in respect of nominal length or property class, the specificat […]
1999
English
GROMMET, PLASTIC, EDGING
MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
1990
English
Product grade A washers with a hardness from 300 HV designed for use with hexagon head bolts and nuts
This standard specifies requirements for product grade A washers with a hardness of 300 HV or more. The preferred application of these washers is in product grades A and B hexagon head bolt/hexagon nut assemblies, with widths across flats as specified in ISO 272.
1995
English
Square head bolts
This Japanese Industrial Standard specifies the steel square head bolts for general use (hereafter, referred to as "bolts"). Further, the strength class column II (4T) of mechanical properties specified in this Standard will be abolished on April 1, 1999.
1994
English
Hot rolled unalloyed structural steel products – Technical delivery conditions (includes Amendment A 1 : 1993) English version of DIN EN 10025
1.1 This European Standard specifies requirements for long products and flat products of hot rolled non-alloy, base and quality steels in the grades and qualities given in tables 2 and 3 (chemical composition) and 5 and 6 (mechanical properties) in the usual delivery condition as given in […]
1997
English
COMPRESSIBLE-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH STRUCTURAL FASTENERS [METRIC]
1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural bolt. 1.2 Two types of direct tension indicators in nominal diameter sizes M16 through M36 are c […]