ISO/R 2101

ALUMINIUM AND ALUMINIUM ALLOYS – SHEAR TEST FOR RIVET WIRE AND RIVETS

English 1971
0.000
ISO
Detailed Information

This ISO Recommendation applies to the shear testing of aluminium and aluminium alloy rivet wire and rivets, having a diameter not greater than 10 mm (3/8 in).

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 14583
2001
English

Hexalobular socket pan head screws

This International Standard specifies the characteristics of hexalobular socket pan head screws in product grades A and with thread sizes from M2 up to and including M10.
JIS
JIS B 1084
1990
English

Method of tightening test for threaded fasteners

This Japanese Industrial Standard specifies the method of test for obtaining characteristic value for tightening (hereafter referred to as "tightening characteristic value") by combination of b [...]
NASM
NASM 21266
1999
English

GROMMET, PLASTIC, EDGING

MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
DIN
DIN 480
1985
English

Square head bolts with collar and oval half dog point

This standard specifies product grade A square head bolts with collar and oval half dog point, and M 8 to M 24 coarse thread. Where, for special purposes. the bolts are to meet requirements di [...]
DIN
DIN 267-15
1983
English

Fasteners – Technical delivery conditions – Prevailing torque type nuts

The property classes, mechanical and performance properties and the methods of test listed in this standard apply to prevailing torque type nuts - with nominal thread diameters from 3 to 39 mm; [...]
IFI
IFI-113
2007
English

STEEL SELF-DRILLING TAPPING SCREWS

1.1 Scope. This inch series standard covers requirements for steel, self-drilling, tapping screws suitable for use in general engineering applications. The objective of this standard is to ens [...]
ASTM
ASTM C954
2010
English

STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 mm) TO 0.112 IN. (2.84 mm) IN THICKNESS

1.1 This specification covers minimum requirements for steel drill screws for use in fastening gypsum panel products or metal plaster bases to steel members from 0.033 in. (0.84 mm) to 0.112 in [...]
JIS
JIS B 1101
1996
English

Slotted head screws

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws") , stainless steel slotted head screws (hereafter referred to as “stainless s [...]
ASME
ASME B18.13
2008
English

SCREW AND WASHER ASSEMBLIES – SEMS

(a) This standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. The word SEMS is recognized in the United S [...]