JIS A 5542

Bolts of turnbuckle for building

English 2003
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the bolts of turnbuckle used for building made of carbon steel products, hot-dip zinc coated carbon steel products and stainless steel products (hereafter referred to as “ bolts” ).

For the bolts of turnbuckle for building of carbon steel products (except M6 to M10 ) with material of SS400 of JIS G 3101 are specified in Annex (normative).

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 918
1979
English

Fasteners – Terminology – Spelling of terms – Abbreviations

This standard applies to fasteners as described in clause 2 and specifies terms for them, terms for the most important characteristics of the parts and their abbreviations. When specifying […]
ASTM
ASTM A449
1993
English

Standard Specification for Quenched and Tempered Steel Bolts and Studs

1.1 This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required. […]
DIN
DIN 267-18
1981
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Teile aus Nichteisenmetallen

Diese Norm gilt für mechanische Verbindungselemente mit Gewinde (im wesentlichen Schrauben und Muttern) als Fertigteile aus Nichteisenmetallen (Schwermetalle und Leichtmetalle) mit - metris […]
ASTM
Abstract of ASTM B633
1998
English

ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL

1.1 This specification covers requirements for electrodeposited zinc coatings applied to iron or steel articles to protect them from corrosion. It does not cover electrodeposited zinc coate […]
DIN EN
DIN EN 10263-2
2002
English

Steel rod, bars and wire for cold heading and cold extrusion Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working – English version of DIN EN 10263-2

This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion wit […]
DIN
DIN 961
1970
German

Sechskantschrauben- Gewinde annähernd bis Kopf – Metrisches Feingewinde – Ausführung m und mg

Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt. Technische Lieferbedingungen nach DIN 267
DIN
DIN 7996
1986
English

Cross recessed pan head wood screws

As a departure from DIN 7996, March 1975 edition (which was withdrawn in December 1984), the present edition specifies a second type of cross recess, viz. cross recess type Z, also referred […]
DIN
DIN 6918
1990
English

Square taper washers for high-strength structural bolting of steel channel sections

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel channel sections in accordance with DIN 18 800 Part 1, together with DIN6914 bolts and DIN6915 nuts.
DIN EN
DIN EN 24036
1992
English

Hexagon thin nuts – Product grade B (unchamfered) (ISO 4036 :1979) English version of DIN EN 24 036

This International Standard gives specifications for hexagon thin nuts with metric dimensions and thread diameters from 1,6 up to and including 10 mm and product grade B. If, in special ca […]