Check out other specifications
1995
English
Hexagon fit bolts
This standard specifies dimensions and technical delivery conditions for M8 to M52 hexagon fit bolts, assigned to product grade A (for size M10 or less) or product grade B (for size M12 or greater). For hexagon fit bolts of sizes greater than M39, the specifications of this standard apply […]
2010
English
HEX CAP SCREWS, BOLTS, AND STUDS, STEEL, HEAT TREATED, 120/105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL USE
1.1 This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters over 1.0 in. to 1-1/2 in.; and 90 ksi for diameters 1-3/4 in. to 3.0 in. inclusive. The term “fa […]
1983
English
Plain washers – Extra large series – Product grade C
This International Standard lays down the specification for plain washers of product grade C with large outside diameter, preferable for bolts, screws and nuts in wood constructions, with thread sizes from M 5 to M 36 inclusive.
1999
English
MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
This SAE standard covers the mechanical and material requirements for inch-series steel bolts, screws, studs, SEMS, and U-bolts used in automotive and related industries in sizes to 1-1/2 in. inclusive. The term "stud" as referred to herein applies to a cylindrical rod of moderate length […]
1984
German
Mechanische Verbindungselemente – Technische Lieferbedingungen Oberflächenfehler an Muttern
Diese Norm ergänzt DIN 267 Teil 1, Teil 2, Teil 4, Teil 15 und Teil 23 sowie DIN ISO 898 Teil 2 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberflächenfehlern an Muttern mit Festigkeitsklassen nach DIN ISO 898 Teil 2 bzw. DI […]